GPS Syncronized Clocks

Sync Clock is general Purpose Clock, which may be networked with 10/100 Ethernet. One clock is designated as Master Clock, which updates the time of all the Slave clocks, every 10 seconds.

Sync Clock has 6 digit of seven segment Red LED Display with 90 mm Character. You may connect Siren to the Clocks. Siren is activated at predefined time.

    Sync Clock comes in two categories –
  • Normal Sync Clock with or without Siren
  • GPS Sync Clock with or without siren

With Normal Sync Clock, you need to ensure that the Master Clock has correct time as other clocks are controlled by the Master Clock.

With GPS Clock as Master, You need not bother about ensuring the time of Master Clock as the GPS clock has inbuilt GPS Receiver to get accurate time from satellites.

GPS used is SIRF III with simultaneous receiving of 12/20 satellite channels. All the Sync Clocks including GPS clocks have battery backed Real Time Clock that maintains time.

While installing the GPS antenna care must be taken so that the antenna faces the open sky.



  • Built-in Siren Facility
  • Built in RTC Battery
  • Communication Protocols - RS232, TCP/IP
  • Enclosure Size -130 mm * 565 mm * 80 mm
  • Enclosure Color - Black
  • Power Supply Rating: Input - 230V AC, Adapter Output: 12V DC, 2 AMP
  • Processor- 32 bit ARM7 TDMI 60 MHz, 512 KB Flash, 32 KB RAM
  • Display - 6 Digit Seven segment with 90mm each digit width
  • Temperature 0 to 50 Degree Celsius
  • Humidity 10% to 90%
  • Size: 130 mm * 565 mm * 80 mm
  • An be place in Common areas eg Public Area :
    – Railway Stations
    – Malls
    – Schools/Colleges
    – Theaters
    – Offices
    – Industry


* - Optional

© 2012 SIFA Sanpra Systems Private Limited

· Site Map